FAQ: What Type Of Plywood For Flooring?

What type of plywood do you use for flooring?

CDX plywood is the most popular type of traditional plywood. It’s made with a rough outer layer that typically grades C, D or X. Almost all subfloor plywood is some type of CDX. There’s no reason to buy high grade finished plywood for use as a subfloor if your just going to cover it up with finished flooring.

What thickness plywood should I use for flooring?

The recommended thickness of the plywood subfloor is governed by the spacing of the joists. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.

What kind of plywood do you use for subfloor?

Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring. The tongue-and-groove edges interlock to resist movement along the panel edges and create an overall stiffer floor.

You might be interested:  Readers ask: What If I Use 3/4 Inch Plywood Decking On My Roof?

Is it better to use OSB or plywood for subfloor?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

Is 12mm plywood OK for flooring?

12mm Plywood The cross-graining technique used in our 12mm ply improves strength, stability and prevents warping, making it excellent for bath panelling, wall lining floors and roofs.

What are disadvantages of plywood?

Disadvantages of Plywood:

  • It is more expensive than Medium Density Fiberboard (MDF).
  • Because the layers of veneers are seen at the edges, edges have to be finished either with laminate or veneer.
  • It often get splinter from the edges during transportation.
  • It is quite difficult to cut.

What thickness plywood should I use for bathroom flooring?

Consider what the top layer of the bathroom flooring will be since some types of plywood are better suited for different flooring. For hardwood, tongue-and-groove CDX plywood rated AC with a 1/2- to 3/4-inch thickness is best. Specifically for subflooring, tongue-and-groove plywood is strong and will reduce squeaks.

Can you use treated plywood for subfloor?

Use pressure treated wood in any situation where there’s direct contact between the wood and anything that could supply moisture. Subflooring in the kitchen and bathroom may also be pressure treated since water leaks are common in these rooms and subflooring is inaccessible to the residents.

You might be interested:  Readers ask: What Plywood To Use For Roof?

What is the strongest plywood?

If you ever wondered “what is the strongest plywood?” The answer is Marine plywood. It is the strongest and toughest of all plywood on the market. It is bonded with high-quality glues to make the plies structurally solid and resistant to moisture.

Do you nail or screw subfloor?

Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.

What is the best material for subfloor?

Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

Is it OK to use OSB for subfloor?

Most local codes allow OSB to be used for subflooring. It’s always best to check with your local permitting office before using OSB for your subfloor. One advantage that OSB has over plywood is its larger formatting. For plywood, 8-foot and 10-foot long sheets of plywood are standard.

Whats stronger OSB or plywood?

Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists. However, nail-holding ability controls performance in shear wall applications.

Should you lay plywood over plank subfloor?

Take time to make sure your existing planks are well secured in place. Repair any broken planks. Install a layer of at least ½” or preferably 5/8” ply over the existing planks. Like all wooden flooring products, it’s a good idea to acclimatise your plywood before laying it.

Leave a Reply

Your email address will not be published. Required fields are marked *