- 1 Which way do you lay plywood subfloor?
- 2 Can you use plywood for flooring?
- 3 What thickness plywood should I use for flooring?
- 4 Do you nail or screw subfloor?
- 5 What are disadvantages of plywood?
- 6 What is the best plywood to use for flooring?
- 7 Is 12mm plywood OK for flooring?
- 8 Is it better to use OSB or plywood for subfloor?
- 9 What thickness plywood should I use for bathroom flooring?
- 10 Can I use 1/2 inch plywood for shed floor?
- 11 Can I use screws for subfloor?
- 12 Can I use drywall screws for subfloor?
Which way do you lay plywood subfloor?
Install plywood underlayment smooth side up. To avoid damage to the surface, install underlayment immediately before laying the finish flooring.
Can you use plywood for flooring?
Plywood floors are suitable for any room where you’d otherwise install hardwood, though kitchens and bathrooms are less desirable since frequent water spills are likely. A 1½-in thick, 4-foot by 8-foot sheet of CDX plywood (the kind used in subflooring) sells for around $15.
What thickness plywood should I use for flooring?
The recommended thickness of the plywood subfloor is governed by the spacing of the joists. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.
Do you nail or screw subfloor?
Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.
What are disadvantages of plywood?
Disadvantages of Plywood:
- It is more expensive than Medium Density Fiberboard (MDF).
- Because the layers of veneers are seen at the edges, edges have to be finished either with laminate or veneer.
- It often get splinter from the edges during transportation.
- It is quite difficult to cut.
What is the best plywood to use for flooring?
In my experience as a custom home builder, traditional plywood is the best for flooring followed by CDX and then OSB. A strong subfloor is a very important part of building a strong house. If the subfloor plywood isn’t right, your tile could crack, wood floors might squeak and gaps may open up between flooring planks.
Is 12mm plywood OK for flooring?
12mm Plywood The cross-graining technique used in our 12mm ply improves strength, stability and prevents warping, making it excellent for bath panelling, wall lining floors and roofs.
Is it better to use OSB or plywood for subfloor?
The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.
What thickness plywood should I use for bathroom flooring?
Consider what the top layer of the bathroom flooring will be since some types of plywood are better suited for different flooring. For hardwood, tongue-and-groove CDX plywood rated AC with a 1/2- to 3/4-inch thickness is best. Specifically for subflooring, tongue-and-groove plywood is strong and will reduce squeaks.
Can I use 1/2 inch plywood for shed floor?
Use 1/2-inch pressure-treated plywood in a light-duty shed. For basic storage of hand tools such as rakes, shovels, trimmers and others, 1/2-inch pressure-treated plywood as a shed floor will be sufficient.
Can I use screws for subfloor?
Screws need to be twisted into the subfloor, which takes more time than simply shooting a nail into subfloor material. However, some screw guns, like the Senco DuraSpin DS440-AC, are auto-fed. A collated strip of screws in this case makes screwing subfloors a little faster, although it’s not as swift as nailing.
Can I use drywall screws for subfloor?
Whatever you do, don’t use drywall screws for the subfloor. Under the stress of regular wear and tear, drywall screw heads usually snap off if they are employed in the subfloor. It’s better to use screws whose features are specifically engineered to work for securing subfloor plywood in place.